The pasting of glazed tiles mostly starts from the outer corner, so that the incomplete tiles remain in the inner corner. If there is a pool and a mirror frame, the pool and mirror frame should be used as the center to stick to both sides. Cut the tiles with an alloy steel drill according to the desired size score and then grind the edges on the grinding wheel. If there are holes in the wall, use the glazed tiles to align the holes up, down, left and right, place the glazed tiles on a flat hard object, tap the alloy steel drill lightly with a small hammer, first chisel the surface layer, and then chisel Inner layer until required.

When the glazed tiles are pasted, the joints of each layer of bricks should be horizontal and vertical, the uneven parts should be leveled at any time, and the mortar at the vertical joints should be cleaned at any time. net. The brick joints are smoothed with white cement.
1. The surface of glazed tiles should be flat and smooth, with regular geometric dimensions, round or flat edges should be straight; no edges should be missing;
2. The texture is firm, the color is consistent, and there should be no dark marks and cracks; the whiteness of white glazed tiles should not be lower than 78°, and the color of plain colored tiles should be consistent;
3. The printed and patterned tiles should be put together first to ensure that the picture is complete, the lines are smooth and smooth, and the connection is natural.